Adam Sub8 Service Manual download pdf (Page 7)

English

Controls and Connectors on the Backpanel

Input - Balanced and Unbalanced

Thesestereojacks-XLRinthebalanced(alsonamed:sym-

metrical), Cinch or RCA in the unbalanced (also named:

asymmetrical)case,shouldbeconnectedtotheoutputof

your mixing console or stereo/surround sound system.

Satellite out - Balanced and Unbalanced

Thesejacksshouldbeconnectedtotheinputsofyouractive

studiomonitorsortheinputsofapowerampthatdrivespas-

sivemonitors.Thesignalissimultaneouslyavailablefromall

connectors.

Final recommendation:

After using the set up a few times we recommend to test the position of the controls again.

Inmostcases,whentheexcitementaboutthenewbottomhasbecomeless,youprefera

solutionwithlessbasslevel,andfromourexperiencethiswillbethemorecorrectone.

Satellite Filter

Thesatellitesinsuchasystemcanbedrivenfullrangeorwitha85Hzhigh

pass as recommended by Dolby® laboratories for use in surround set-ups.

Recommendation:IfpossiblegowiththemainsignaltotheSub8rstand

connectyoursatellitestotheSub8output,beitXLRsymmetricalorRCAasym-

metrical.Topreventthesatellitesfromthelowfrequenciesinmostcasesleadstoabetter

soundfromyoursatellites,astheydonothavetodeliverthebigamplitudes.Oftenclarity

anddynamicrangeofthesespeakersareimprovedthatway.

Attention! If you switch the ﬁlter in or out, it often becomes necessary to switch the

phase as well - try it out please!

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Adam Sub8 Service Manual Page 7